For a class V hitch on your 2022 Ford F-350 cab and chassis you are going to want the Draw-Tite Ultra Frame Trailer Hitch Receiver item # DT52MR. This hitch is custom fit and bolts directly to your Ford with included hardware. It has a 2" receiver and a maximum gross trailer weight of 18,000 lbs. The Curt Heavy Duty Forged Ball Mount for 2" Hitches - 5" Rise - 6" Drop - 17,000 lbs item # C45342 will work great with this hitch.
For a heavy duty ball mount that fits a 2-1/2" receiver and... view full answer...
If you have the 6-3/4' bed with the factory prep package on your 2017 Ford F-350 then you can use the B&W Companion OEM 5th Wheel Trailer Hitch w Slider (20K) part # BWRVK3370. If you have the 8' bed with the factory prep package on you 2017 Ford F-350 then you can use the B&W Companion OEM 5th Wheel Hitch (25K) part # BWRVK3305. Unfortunately, they do not make a B&W Companion OEM 5th Wheel Trailer Hitch w Slider for your F-350 with a 25K capacity.
Also, if you by chance have the cab and... view full answer...
Pictures can sometimes be deceiving. The holes in the side brackets for the hitches that fit cab and chassis models of the 2015 Ford F-350 are not actually in a straight line. They are off-center from each other. This is shown well on Draw-Tite hitch # 41947. I have included a more top-down picture of it so you can see what I mean. view full answer...
I checked with Timbren and they informed me that the overall height of the # TFR350TTCC that you referenced is 7-1/4 inches including all of the spacers and brackets. view full answer...
Yes, the Custom Third Brake Light Camera for 8" Factory Monitor # 3460006 will work just fine with the Sync 3.4 system on your 2015 Ford F-350 Super Duty Lariat Crew Cab.
I have also included a video of # 3460006 being installed on a 2015 Ford F-350 Super Duty for you to check out as well. view full answer...
The Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle item # F2176 do fit your 2021 Ford F-350 Cab and Chassis and they will work with your Supersprings. There are no compatibility issues as they mount in different locations.
I recommend adding the Air Lift WirelessAIR Compressor System for Air Helper Springs - Remote - Bluetooth - EZ Mount item # AL74000EZ to your setup. Air Lift's premium, wireless, onboard compressor system with Bluetooth allows you to fill your... view full answer...
I reached out to SuperSprings International and they told me that you should be able to use the SumoSprings Rebel Custom Helper Springs # SSR-128-47-2 on your 2022 Ford F-350 Cab and Chassis. These helper springs will help keep you level when towing or hauling while minimizing bumps and shocks.
These SumoSprings have a 5,000 lb weight capacity and microcellular urethane construction. They are maintenance free, have a bolt-on installation, and are made in the USA.
I have attached a review... view full answer...
We have solutions for you, but first: there are no adapters for this application. A tow bar made for 2-1/2" receivers does no allow reduction like 2" to 1-1/4" accessories do.
Your only two options are to replace your factory hitch with a higher rated aftermarket one. For your 2017 Ford F-350 Cab and Chassis, the Curt Class V, part # C15845, has a 2-1/2" receiver and the added benefit of having the highest towing capacity of any hitch for this vehicle.
Alternatively, you can downgrade... view full answer...
The Fat Bike Adapter Kit for Swagman Quad 2+2, Dispatch, and Chinook Bike Racks # S64694 is the correct adapter to accommodate bikes with tires up to 5 inches wide on the Swagman Chinook 2 Bike Platform Rack # S64683. I attached the video review for the Swagman Chinook # S6463 for you. view full answer...
Yes, the SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SS42FR will fit with your 2022 Ford F-350 Cab and Chassis dually without any issues!
Please note that even though this is rated for 3,000 lbs it will not increase your weight capacity by that much - it's designed to help support up to that much weight on your suspension.
Attached is a review video for you to check out. view full answer...
Yes, the Viair BaseCamp item # VA26WR has a 150 psi capability which will give it plenty power to run a roofing nail gun.
CFM is a measure of flow when it comes to air compressors and air tools. It’s the measure of how much air the compressor can deliver to the air tool. Most roofing nailers require around 2.2 to 2.5 CFM this compressor has a maximum air flow of 2.62 cfm. view full answer...
The Viair TLC Tire Inflator Air Chuck # VA24WR is equipped with a close-ended quick coupler that holds the pressure back so it isn't compatible with regular portable compressors that operate with an open-ended air chuck. The portable Viair TLC compressor kits have the correct quick coupler which is why it works with their setups. view full answer...
The Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2176 is compatible with your 2019 F-350 Cab and Chassis model. I confirmed with Firestone this fits both 2WD and 4WD Cab and Chassis models.
I also recommend using the Air Lift Load Controller Compressor System for Air Helper Springs- Heavy Duty - Single Path # AL25854 to adjust your suspension at any time. view full answer...
Yes, we do have an air bag kit for a 2021 Ford F-350 Cab and Chassis, the Firestone Ride-Rite Air Helper Springs part # F2176 which is the only one available. view full answer...
The Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter part # RP85FR can be used on your 2019 Ford F-350 Short Bed but as you mentioned there will be some limitations to how sharp of a turn you can make. That said, there are no offset adapters for the factory prep package. Therefore, you would just need to be mindful of your turning clearance while using the Reese Goose Box.
The only other 5th wheel to gooseneck adapter that could work is the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck... view full answer...
The B&W Rubber Cover for Stowed Turnoverball # BWGNXA1710 will not fit on the bottom of the Turnoverball unit. You don't want moisture to be held in, so putting a plug on the underside wouldn't be recommended even if it did fit. You want moisture to drain out of the socket. The hitch pin is designed to resist corrosion and the assembly is powder coated to resist corrosion as well. The cover is a great option for when the ball is flipped and it actually fits the underside of the ball... view full answer...
Yes, the Adco # 290-2525 Deluxe RV Windshield Cover fits all 2015 to 2021 T350 Ford Transit cabs regardless of what RV body has been added to them, so it will fit yours perfectly. I like the heavy construction and the optional provacy screen. It's good for winter or summer! view full answer...
If your 2017 Ford F-350 doesn't have the 30 amp fuse and relay in positions 27 and 37 then that would explain why you don't have the 12V power on your 7-Way.
You can easily attain these at your local hardware or home improvement store. Once installed you will have the 12V power at your 7-Way connector.
If you are planning on using this to charge your trailer battery then we have a variety of options to choose from like the Redarc In-Vehicle BCDC Battery Charger # 331-BCDC1225D. view full answer...
The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1116 you currently have is only designed to fit 2017 - 2022 Ford Super Duty trucks. Since your new department truck is a 2023 F-350 you need the kit # BW73FR instead.
I checked the parts included in each kit to see if you would just need new brackets or just a new main body portion between the model years but it looks like both the mounting brackets and the main body are all different parts between... view full answer...
The correct air bags for a 2022 Ford F-350 Cab and Chassis are the Firestone Ride-Rite Air Helper Springs part # F2176. These will do a great job of helping to provide additional support, improving stability, and smoothing out the ride. They have a 4,800 lb weight capacity and they are made here in the USA. view full answer...
Go To Results